View ECL_4470538.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ECL
Vishay Roederstein
Aluminum Capacitors
FEATURES
* Polarized aluminum electrolytic capacitors, non solid electrolyte * Extra low impedance, high ripple current * Temperature up to 105 C * RoHS compliant
RoHS
COMPLIANT
APPLICATIONS
* SMD technology, for high mounting density * Industrial and professional applications * General industrial, consumer
VALUE 6 x 5.8 to 12.5 x 13.5 10 to 1500 20 6.3 to 100 - 40 to 105 2000 IEC 60384-4/ EN 130300 40/105/56
QUICK REFERENCE DATA
DESCRIPTION Nominal case size (O D x L ) Rated capacitance range CR Capacitance tolerance Rated voltage range Category temperature range Load life Based on sectional specification Climatic category IEC 60068 UNIT mm F % V C h
* Smoothing, filtering, buffering
PACKAGING
* Supplied in blister tape
SELECTION CHART FOR CR, UR AND RELEVANT NOMINAL CASE SIZES (O D x L in mm)
CR (F) 10 22 33 47 68 100 220 330 470 680 1000 1500 RATED VOLTAGE (V) 6.3 6.3 x 5.8 8 x 6.2 10 x 10 10 x 10 10 6.3 x 7.7 8 x 10 10 x 10 16 6.3 x 5.8 8 x 6.2 8 x 10 10 x 10 25 6.3 x 5.8 8 x 6.2 8 x 10 35 6.3 x 5.8 6.3 x 5.8 8 x 6.2 8 x 10 10 x 10 50 6.3 x 5.8 6.3 x 5.8 8 x 6.2 8 x 6.2 8 x 10 10 x 10 -
Document Number: 25020 Revision: 17-Jul-08
For technical questions, contact: aluminumcaps1@vishay.com
www.vishay.com 287
ECL
Vishay Roederstein
Aluminum Capacitors
DIMENSIONS in millimeters
CASE SIZE CODE AD BM AE AF AG AH D 6.3 0.5 6.3 0.5 8 0.5 8 0.5 10 0.5 12.5 0.5
Capacitance +
OD
L 5.8 0.3 7.7 0.4 6.2 0.4 10 0.5 10 0.5 13.5 0.5
A 2.4 0.2 2.4 0.2 3.3 0.2 2.9 0.2 3.2 0.2 4.6 0.2
B 6.6 0.2 6.6 0.2 8.3 0.2 8.3 0.2 10.3 0.2 12.8 0.2
C 6.6 0.2 6.6 0.2 8.3 0.2 8.3 0.2 10.3 0.2 12.8 0.2
N max.
E 2.2 0.2 2.2 0.2 2.3 0.2 3.1 0.2 4.5 0.2 4.5 0.2
R 0.5 ~ 0.8 0.5 ~ 0.8 0.5 ~ 0.8 0.8 ~ 1.1 0.8 ~ 1.1 1.1 ~ 1.4
N 0.3 0.3 0.3 0.3 0.3 0.3
+ Positive P max.
A
P 0.5 0.5 0.5 0.5 0.5 0.5
Plastic plateform
C
22 A 50
B
Lot no.
Voltage
E
A
L R
- Negative
ELECTRICAL DATA
SYMBOL UR CR tan RESR IR Z rated voltage rated capacitance at 120 Hz max. dissipation factor at 120 Hz max. equivalent series resistance at 120 Hz rated alternating current at 120 Hz and upper catagory temperature max. impedance at 100 kHz apply at DESCRIPTION
ORDERING EXAMPLE
ECL 22 F/50 V, 20 %, size 6.3 x 5.8 mm Ordering code: MALSECL00AD222HARK For Standard Packaging Quantity (SPQ) and Minimum Order Quantity (MOQ) please refer to our price list or contact customer service.
Note Unless otherwise specified, all electrical values Tamb = 20 C, P = 86 to 100 kPa, RH = 45 to 75 %.
ELECTRICAL DATA AND ORDERING INFORMATION
UR (V) CR 120 Hz (F) 220 330 1000 1500 220 470 680 100 220 330 470 68 100 220 DIMENSIONS DxL (mm) 6.3 x 5.8 8 x 6.2 10 x 10 10 x 10 6.3 x 7.7 8 x 10 10 x 10 6.3 x 5.8 8 x 6.2 8 x 10 10 x 10 6.3 x 5.8 8 x 6.2 8 x 10 tan 120 Hz 0.24 0.24 0.24 0.24 0.19 0.19 0.19 0.16 0.16 0.16 0.16 0.14 0.14 0.14 Z 100 kHz/ 20 C () 0.44 0.26 0.09 0.09 0.34 0.17 0.09 0.44 0.26 0.17 0.09 0.44 0.26 0.17 IR 100 kHz/ 105 C (mA) 230 300 670 670 280 450 670 230 300 450 670 230 300 450 WEIGHT (g) 0.30 0.55 1.21 1.21 0.40 1.00 1.21 0.30 0.55 1.00 1.21 0.30 0.55 1.00 CATALOG NUMBER MALSECL00AD322BARK MALSECL00AE333BARK MALSECL00AG410BARK MALSECL00AG415BARK MALSECL00BM322CARK MALSECL00AF347CARK MALSECL00AG368CARK MALSECL00AD310DARK MALSECL00AE322DARK MALSECL00AF333DARK MALSECL00AG347DARK MALSECL00AD268EARK MALSECL00AE310EARK MALSECL00AF322EARK Document Number: 25020 Revision: 17-Jul-08
6.3
10
16
25
www.vishay.com 288
For technical questions, contact: aluminumcaps1@vishay.com
ECL
Aluminum Capacitors
Vishay Roederstein
ELECTRICAL DATA AND ORDERING INFORMATION
UR (V) CR 120 Hz (F) 33 47 68 100 220 10 22 33 47 68 100 DIMENSIONS DxL (mm) 6.3 x 5.8 6.3 x 5.8 8 x 6.2 8 x 10 10 x 10 6.3 x 5.8 6.3 x 5.8 8 x 6.2 8 x 6.2 8 x 10 10 x 10 tan 120 Hz 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 Z 100 kHz/ 20 C () 0.44 0.44 0.26 0.17 0.09 0.88 0.88 0.63 0.63 0.34 0.18 IR 100 kHz/ 105 C (mA) 230 230 300 450 670 165 165 300 300 450 670 WEIGHT (g) 0.30 0.30 0.55 1.00 1.21 0.30 0.30 0.55 0.55 1.00 1.21 CATALOG NUMBER MALSECL00AD233FARK MALSECL00AD247FARK MALSECL00AE268FARK MALSECL00AF310FARK MALSECL00AG322FARK MALSECL00AD210HARK MALSECL00AD222HARK MALSECL00AE233HARK MALSECL00AE247HARK MALSECL00AF268HARK MALSECL00AG310HARK
35
50
REFLOW SOLDERING CONDITIONS FOR SMD ALUMINUM ELECTROLYTIC CAPACITORS
TP Ramp-up TL
Ts max.
tP Critical Zone TL to TP
Temperature
tL
Ts min. ts Preheat
Ramp-down
t 25 C to Peak Time
PROFILE FEATURE
SOLDERING CONDITION O 4 ~ O 10 Average ramp-up rate (TL to TP) Preheat Temperature min. (Ts min.) Temperature max. (Ts max.) Time (Ts min. to Ts max.) Ts max. to TL Ramp-up rate Time maintained above Temperature (TL) Time (tL) Document Number: 25020 Revision: 17-Jul-08 217 C 60 ~ 90 s For technical questions, contact: aluminumcaps1@vishay.com 217 C 40 ~ 60 s www.vishay.com 289 3 C/s max. 3 C/s max. 150 C 200 C 60 ~ 150 s 40 ~ 120 s 150 C 200 C 40 ~ 100 s 3 C/s max. O 12.5 3 C/s max. O 16
ECL
Vishay Roederstein
PROFILE FEATURE
Peak/classification temperature (TP) Time within 5 C of actual peak temperature (TP) Ramp-down rate Time 25 C to peak temperature 250 C 10 s max. 3 C/s max. 8 min max. 240 C 10 s max. 3 C/s max. 8 min max. 230 C
Aluminum Capacitors
RESISTANCE TO SOLDERING HEAT
Leakage current Capacitance value tan Less than specified value Within 10 % of initial value Less than specified value
LOW TEMPERATURE BEHAVIOR (at 120 Hz)
IMPEDANCE RATIO (Z) T2/(Z) T1 T2/T1 - 25 C/+ 20 C - 40 C/+ 20 C 6.3 2 3 10 2 3 16 2 3 RATED VOLTAGE (V) 25 2 3 35 2 3 50 2 3 63 3 4 100 3 4
MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY
FREQUENCY (Hz) 50 120 300 1000 10 000 100 000 IR MULTIPLIER 0.41 0.59 0.69 0.80 0.88 1.00
ADDITIONAL ELECTRICAL DATA
PARAMETER Current Leakage current (Test conditions: UR, 20 C) Resistance Equivalent series resistance (ESR) Calculated from tan max. ESR = tan /2 f CR After 2 min at UR IL2 0.01 x CR x UR or 3 A for UR 100 V (whichever is greater) CONDITIONS VALUE
TEST PROCEDURES AND REQUIREMENTS
TEST Load life PROCEDURE (QUICK REFERENCE) Tamb = 105 C UR and IR applied After 2000 h No voltage applied After 1000 h After test: UR to be applied for 30 min 24 to 48 h before measurement REQUIREMENTS C/C: 25 % of initial value IL spec. limit tan 2 x spec. limit C/C: 25 % of initial value IL spec. limit tan 2 x spec. limit
Shelf life
www.vishay.com 290
For technical questions, contact: aluminumcaps1@vishay.com
Document Number: 25020 Revision: 17-Jul-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 18-Jul-08
www.vishay.com 1

▲Up To Search▲

Price & Availability of ECL

	To Download ECL Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .